Front Door & Hinges

I got the door hinges, deadbolt and doorknob mounted in the front. I had no mortise hinges, but after seeing a build by Greg Wheeler, I decided to opt for marine strap hinges.

I order the brass hinges from Seadog Line. It works as smooth as Greg's. The hinges are 4" x 1 1/16" and use #8 screws.

I got pictures of the hinges in place but did not take any shots of the doorknob or the lock. I used a standard combination what others have used. I'll get some pictures up of all that soon.

The door lock and knob are from screen door hardware. I also installed the mermaid handles.

Plinthes finished and installed!

 On the "wet coast" haven't seen much wet... So got a little progress done, as much as I can anyways.

Most of the main centre roof supports are in, they are carved with west coast themes.

On Port, the humpback whale, starfish, and eagle/Seahawk catching a salmon.

On starboard, the great heron, spirit bear, and harbour seal.

They are double sided hand-carvings except for the aft.. as it is up against the bulkhead on starboard, and what will be a storage cupboard on Port.

I didn't do the carvings myself, but relied on my significant other, Karen McMahon who is a fine-arts graduate.

My role was limited to cutting shapes and finishing tasks.

Windows Installed!

 Got all six of the opening windows and the frames installed this weekend, made a pattern and cut out the front windows, now just need to install the front with fixed wooden frames. I am still deciding on keeping the opening frames more "rustic" for the cottage feel by not plugging the screw holes, which was my original plan, or plugging with screw plugs for a more finished approach. Still many finishings to go, like the roof angle supports (plinthes).. etc. But more progress.

Finished door trim and dry fit windows

 Finally got all the door trim installed and began dry fitting the windows.

Back in the saddle again!

 After a couple cancer surgeries making progress again, got the the front and back door sills and plywood faces in front and aft etc.., front windows framed in and have fully framed out the head area. Will post more pictures as it comes along. I changed the front window size slightly as I wanted a little more beef around the edges.

A little wonky, I'll admit and have a few coats of varnish and sanding, some filling and some trim work along the roof I want to put in, but it will have to do.