The backyard building and adventures of a small shanty/houseboat based on the "Dianne's Rose" design by Roy Schreyer. The designs can be found at https://www.roydesignedthat.com/
Completed cutting and placing the the rest of the bottom panels. The are "stitched" in on the angle by using blocks as a "butterfly" clamp to since the sides into the gap. They are permanently held in place by screws and thickened epoxy.
Once the bottom sides are attached, the wooden block clamps are removed, and the holes filled.
Installed the bottom panels, screwing the curve down to the front frame. Had to use a ratchet strap to pull down the front. Each of the screws was filled with epoxy.
